Where do I install it?

Aqua-Rex is simple to install. Just wrap the wires around the inlet pipe to the water heater. Second choice would be on the softener loop or third choice anywhere else on the cold water supply. Remember the signal goes in both directions, upstream and downstream so you don’t need to pass the water through the wires to have it treated. Just plug the transformer into an outlet – that is all you have to do. No set up or calibrating and it needs no servicing, supplies or maintenance, it is Plug and Play. It cost around $20 a year in electricity. There are no pipes to cut or plumbing to play with so its perfect if you are a Renter. Just remember to take it with you when you move home.